Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
NP271 Transfer Case for 2007-2010 Ford F-series
Original price was: $1,499.99.$1,349.00Current price is: $1,349.00.
- All units are quality inspected throughout the remanufacturing process to maintain our quality standard.
- All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
- 100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
- Units are shipped in high density plastic totes to help eliminate in-transit damage.
This fully remanufactured Transfer Case is backed by an available 7 year, 1 million mile warranty.
Questions? Call Toll-Free: 888-842-0023.
Order Online
Be sure to check application notes and verify VIN code/cast no. before ordering.
Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
Description
Application Notes: NV271; 34 Spline Input, Manual Shift, 3 Mounting Holes On Rear Extension Housing, Bolt On Rear Yoke, Tag Numbers: 7C34-BA, 7C34-BB, 7C34-BD, 7C34-BE, Hollander Number: 412-589, Other Numbers: UMT432-4.
Remanufacturing Process
Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
- Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
- Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
- New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
- Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process
Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.
Additional information
| Weight | 150 lbs |
|---|---|
| Dimensions | 42 × 27 × 26 in |
| Model Number | NP271 |
| Application Notes | 34 Spline Front Input Shaft Manual Shift, 5 Speed Auto,Zf, w/o Speedo Hole, W/3 Mounting Holes On . ASSM# 7c34-Ba,7c34-Bb,7c34-Bd. 34 Spline Input, Manual Shift, 3 Mounting Holes On Rear Extension Housing, Bolt On Rear Yoke, Tag Numbers: 7C34-BA, 7C34-BB, 7C34-BD, 7C34-BE, Hollander Number: 412-589, Other Numbers: UMT432-4 |
| Product Type | Transfer Cases |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.