NP242 Transfer Case for 1997-2001 Jeep Cherokee & Grand Cherokee
$1,199.99 Original price was: $1,199.99.$1,049.00Current price is: $1,049.00.
- All units are quality inspected throughout the remanufacturing process to maintain our quality standard.
- All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
- 100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
- Units are shipped in high density plastic totes to help eliminate in-transit damage.
This fully remanufactured Transfer Case is backed by an available 7 year, 1 million mile warranty.
Questions? Call Toll-Free: 888-842-0023.
Order Online
Be sure to check application notes and verify VIN code/cast no. before ordering.
Fitment Guarantee - We call to verify every order so you get the exact powertrain product you need!
Description
Application Notes: NV242J; 23 Spline 0.84 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 27 Exposed Spline Style Rear Output Shaft With Rubber Boot, 1.75 Inch Speedo Hole, 4 Pin Indicator Switch Above Shift Lever, 1 Piece Tail Housing, Tag Numbers: 52098383, 52098899, 52098899AC, 52098917, 52111083, Hollander Numbers: 412-332, 412-358, Other Numbers: UMT208-2.
Remanufacturing Process
Every transfer case we sell is fully remanufactured to meet or exceed OEM specifications. Our remanufacturing process:
- Deep Clean – To start the remanufacturing process, each transfer case is fully disassembled and cleaned
- Inspection – Each transfer case is carefully inspected for cracks, excessive wear, shaft warp, and chain stretch
- New Components – All seals, bearings, joints and rings are replaced as well as electrical components (solenoids and control units)
- Validation – After reassembly, each individual transfer case is spin tested as part of a detailed checklist validation process
Because of our rigorous remanufacturing process, we can offer the industry’s best warranty on remanufactured transfer cases. Each transfer case comes with up to 7 years and 1 million miles of warranty, which can be upgraded to include Pure Care™ no-fault protection. No other transfer case manufacturer comes close.
Additional information
Weight | 80 lbs |
---|---|
Dimensions | 34 × 24 × 18 in |
Model Number | NP242 |
Application Notes | Select-Trac, 23 Spline Input, 27 Spline Rear Slip, Fixed Front Output Yoke, 1.750 Speedo Hole, One . ASSM# 52098383, 52098899, 52098899ac,52098917, 52111083. 23 Spline 0.84 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 27 Exposed Spline Style Rear Output Shaft With Rubber Boot, 1.75 Inch Speedo Hole, 4 Pin Indicator Switch Above Shift Lever, 1 Piece Tail Housing, Tag Numbers: 52098383, 52098899, 52098899AC, 52098917, 52111083, Hollander Numbers: 412-332, 412-358, Other Numbers: UMT208-2 |
Product Type | Transfer Cases |
Only logged in customers who have purchased this product may leave a review.
Year | Make | Model | Engine | Part Type |
---|
Reviews
There are no reviews yet.